Skip to main content

3 minutes of reading remaining

Custom Fabrication

Custom Bumpers and Racks in Newport Beach

TLDR

Custom Bumpers and Racks for Newport Beach owners. Typical range $1,000 to $10,000 and up over 5 to 45 hours. Performed in shop with direct insurance billing.

About Custom Bumpers and Racks in Newport Beach

Custom bumpers and racks are fabricated in steel and aluminum with the load path into vehicle structure verified first. Newport Beach builds are coated for coastal corrosion resistance as standard.

Bumpers and racks are where fabrication meets structural engineering, because both carry load into a vehicle that was not designed for it. A rear bumper with a receiver and a spare carrier applies leverage to the frame every time you hit a bump. A roof rack loads a surface engineered to hold nothing but its own weight. We design the load path before we design the part.

Problems We Solve

These are the situations Newport Beach owners bring us most often for this work. If yours is not listed, call and describe it. We would rather tell you it is outside our scope than take a job we are not the right shop for.

  • No off the shelf bumper or rack fits the vehicle
  • Existing rack flexing or damaging the mounting surface
  • Needing a receiver, tire carrier, or accessory mount integrated
  • Aftermarket part that has cracked its mounts

What Is Included

  • Load path design and structural verification
  • Steel and aluminum fabrication by certified welders
  • Corrosion resistant coating as standard

Ballpark Pricing

Every job is quoted from the vehicle after inspection. The ranges below let you plan before you call. Body and paint labor is billed at $210 per hour, mechanical and electrical at $260 per hour, and diagnostics at $285 per hour with the diagnostic hour refunded as a credit against an authorized repair.

Ballpark price ranges
Scope of WorkBallpark RangeTypical Hours
Custom Bumpers and Racks$1,000 to $10,000 and up5 to 45 hours

Ranges are ballpark figures for planning. Your written estimate is built from the actual vehicle after inspection.

Collision estimates are provided at no charge and insurance walk ins are always welcome. RV systems estimates covering slides, awnings, water, electrical, and generators are $150, refunded as a credit against an authorized repair. See the full posted rates and terms.

Insurance Notes

Aftermarket fabrication is a common claim dispute. Documenting the build at the time it is done converts a contested modification into an established one.

We bill direct with every major carrier and hold direct repair relationships with several. Read how the claim process works or the 25 things carriers do not tell you about RV and van claims.

Other Custom Fabrication Services

Related

Answers

Custom Bumpers and Racks Questions From Newport Beach Owners

Can you mount a rack to a fiberglass roof?

Only with a load path into the structure beneath. Mounting to skin alone is how racks tear out and take laminate with them.

Do you build to my drawing?

Yes, after reviewing it for load path, material, and mounting feasibility. We will tell you if something will not work before we build it.

How long does a custom build take?

Two to six weeks typically, including design approval, fabrication, coating, and fitting.

Ready to Get Your Vehicle Fixed the Right Way?

Bring us the claim, the damage, or the project. We handle collision, paint, structural, interior, and systems work in one 35,000 square foot facility and we bill your carrier direct.

100% Satisfaction Guarantee on Workmanship and Materials | Transparent Communication | Insurance Claim Experts